shaleprofile + 242 November 22, 2018 (edited) Marcellus (PA) – update through September 2018 This article contains still images from the interactive dashboards available in the original blog post. To follow the instructions in this article, please use the interactive dashboards. Furthermore, they allow you to uncover other insights as well. --- This interactive presentation contains the latest gas (and a little oil) production data, from all 8,512 horizontal wells in Pennsylvania that started producing since 2010, through September. Visit ShaleProfile blog to explore the full interactive dashboards Gas production from horizontal wells came in higher again in September, at 17.4 Bcf/d. Output has grown by about 10% in the 4 preceding months, driven mostly by an increase in well completions; In both August and September, 107 wells started production, the highest since the end of 2014. This increase in completion activity didn’t have a negative effect so far on well productivity. In the ‘Well quality’ tab you’ll find the production profiles for all these wells, averaged by the year in which they started. Group the wells by the quarter in which they started (using the ‘Show wells by selection’), and you’ll see that the best initial performance came from the wells that started in Q3 this year, at over 13 MMcf/d. Of the 5 leading operators, Cabot stood out as it increased gas production by 18% in just 2 months (see the final tab). The ‘Advanced Insights’ presentation is displayed below: This “Ultimate Return” overview shows the relationship between gas production rates, and cumulative gas production, averaged for all horizontal wells that started producing in a certain quarter. Well design has changed significantly over the years; in 2012 about 4 million pounds of proppant was used per completion, on average, while this has recently increased to over 18 million pounds. The plot clearly shows how this has had a positive impact on well productivity. Early next week I will have a new update on the Niobrara. If you missed our live chat last Tuesday with John Sodergreen and Het Shah, about the Permian Basin, you can still read back our discussion here in the enelyst ShaleProfile Briefings channel. Next week Tuesday, at 10:30 am (EST), we’ll take a closer look at gas production in Pennsylvania, and there is enough time to ask questions. If you are not an enelyst member yet, you can sign up for free at www.enelyst.com, using the code: “Shale18” Happy Thanksgiving! Production data is subject to revisions. For this presentation, I used data gathered from the following sources: Pennsylvania Department of Environmental Protection FracFocus.org Follow us on Social Media: Twitter: @ShaleProfile Linkedin: ShaleProfile Facebook: ShaleProfile Edited November 22, 2018 by shaleprofile 3 Quote Share this post Link to post Share on other sites
Tom Kirkman + 8,860 November 23, 2018 Enno, your data and analysis are consistently outstanding. Tip of the hat, Very Well Done, as usual. Nobody else is doing the type of shale oil data mining, analysis and charting like you do. 1 Quote Share this post Link to post Share on other sites
shaleprofile + 242 November 23, 2018 Tom, it's always a great pleasure to receive your feedback, thank you! It's a fantastic to know that you find value in these posts. Happy Thanksgiving my friend! 1 Quote Share this post Link to post Share on other sites
Tom Kirkman + 8,860 November 23, 2018 Thanks Enno, and Happy Thanksgiving to you too. 1 Quote Share this post Link to post Share on other sites
Most Active Members
Recently Online
Popular Members