shaleprofile

Permian: About 10 horizontal wells are completed every single day in the Permian, and production is rising fast

Recommended Posts

(edited)

Permian – update through February 2018

This article contains still images from interactive dashboards available on the blog post. To follow the instructions detailed here, use the interactive dashboards. You can also explore the dashboards to uncover different insights and trends.

---

This interactive presentation contains the latest oil & gas production data from all 15,026 horizontal wells in the Permian (Texas & New Mexico) that started producing since 2009/2010, through February.

Oil production in the Permian from horizontal wells already passed 2 million bo/d in November, and has continued going higher since, even before upcoming upward revisions.

In fact, the current pace of completions of around 10 wells per day, combined with a roughly estimated 300-400 thousand barrels of oil average ultimate recovery (guessed from the chart further down) would support a far higher long-term production capacity of ~3-4 million bo/d. That is, if no other bottlenecks would turn up, and if nothing else changes, both of which are of course unrealistic assumptions. But it does show that the growth story may not be over yet for some time to come.

Oilprice_0606_Graph-01.jpg

 

More horizontal wells were completed in 2017 (3,221 based on the latest count) than in any previous year, and well productivity even slightly improved in 2017 (see the ‘Well quality’ overview).

Oilprice_0606_Graph-02.jpg

 
The final tab shows the performance of the 5 leading operators in this region. The largest operator, Pioneer Natural Resources, is now over 200 kbo/d (gross operated production, from horizontal wells only), double the volume it produced just 2 years ago.
 
Oilprice_0606_Graph-03.jpg
 
 
The ‘Advanced Insights’ presentation is displayed below:
 
Oilprice_0606_Graph-04.jpg
 
This “Ultimate recovery” overview shows the average production rate for these wells, plotted against their cumulative recovery. Wells are grouped by the quarter in which production started.
You can see that recent wells recover on average ~140 thousand barrels of oil in the first year on production, which wells from before 2015 have so far not even managed to do.
 
The 9th tab (‘Gas Oil Ratio’) shows that gas production has grown in tandem with that of oil, and the average gas/oil ratio has remained fairly steady over the years, unlike the Bakken in North Dakota, where it has recently risen significantly.
 
Oilprice_0606_Graph-05.jpg
 
Later this week I will have an update on all 10 covered states in the US, followed by posts next week on the Niobrara and the Appalachian basin.
 
Production data is subject to revisions.
 
Note that a significant portion of production in the Permian comes from vertical wells and/or wells that started production before 2010, which are excluded from these presentations.
 
For these presentations, I used data gathered from the following sources:
  • Texas RRC. Oil production is estimated for individual wells, based on a number of sources, such as lease & pending production data, well completion & inactivity reports, regular well tests and oil proration data.
  • OCD in New Mexico. Individual well production data is provided.
  • FracFocus.org
Visit our blog to read the full post and use the interactive dashboards to gain more insight
https://shaleprofile.com/index.php/2018/06/04/permian-update-through-february-2018/
 
Follow us on Social Media:
Twitter: @ShaleProfile
Linkedin: ShaleProfile
Facebook: ShaleProfile
Edited by shaleprofile
  • Upvote 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.