turbguy + 1,524 February 23, 2021 (edited) Oh, I forgot to mention, that I had a part-time weekend job as a lineboy at a small FBO at the airport in Saratoga Springs, NY. EVERYTHING and anything and everything flew into that place, and I had to fuel it up, handle some UNICOMM, then go clean the bathrooms. That's how I "lost a shirttail" and paid for my single-engine land license. Oh, the stories from that place!! Had a Stearman taxi up to the pumps, and a WOMAN pilot climbed out. I looked up at the upper wing and said "I'm gonna need a bigger ladder". Had an tiny Aeronca taxi up, spotted all over with chunks of mud. They asked for a water hose to wash some off. Found out they had previously landed in a pasture. IT WASN'T MUD! In August, when the horse races were going on, the G2's would land. I had to fuel those, too, but that required driving the fuel truck out to where they chose to "park". ...and EVERYONE expected me to clean the windshield! Edited February 24, 2021 by turbguy 2 Quote Share this post Link to post Share on other sites
Dan Warnick + 6,100 February 24, 2021 2 hours ago, turbguy said: I'm retired from Large Power Generation (coal, oil, nuc, hydro, nat gas, a little wind). I retired when the term PPE was becoming popular. Had a short stint in manufacturing at large steam, heavy duty CT's, and aircraft engines with a "generous" "electric" company. "Hard hats protect soft heads". I really don't know much about oil & gas business at all. Be gentle with me. We have WAY too many TLA's (Three Letter Acronyms)! A typical workspace for me, and it's almost always warm in the winter. Working CT's in winter was BRUTAL! Good to know. I worked in a plant that even Dale would be proud to call home, and then went global when the big boss said that was the new way of doing business. I think he was into the martial arts or something. 😄 Commercial engines since '86. Quote Share this post Link to post Share on other sites
Dan Warnick + 6,100 February 24, 2021 2 hours ago, turbguy said: Oh, I forgot to mention, that I had a part-time weekend job as a lineboy at a small FBO at the airport in Saratoga Springs, NY. EVERYTHING and anything and everything flew into that place, and I had to fuel it up, handle some UNICOMM, then go clean the bathrooms. That's how I "lost a shirttail" and paid for my single-engine land license. Oh, the stories from that place!! Had a Steaman taxi up to the pumps, and a WOMAN pilot climbed out. I looked up at the upper wing and said "I'm gonna need a bigger ladder". Had an tiny Aeronca taxi up, spotted all over with chunks of mud. They asked for a water hose to wash some off. Found out they had previously landed in a pasture. IT WASN'T MUD! In August, when the horse races were going on, the G2's would land. I had to fuel those, too, but that required driving the fuel truck out to where they chose to "park". ...and EVERYONE expected me to clean the windshield! Oh yes, aviation will fill an airman with good memories (amidst the inevitable downturns) for good storytelling later. My first boss out of school was a private owner of a small FBO in Decatur IL. We went on a test flight one day in a customer's King Air and ended up at a Stearman fly in. Fantastic airplanes! Much bigger than I had imagined until then, too. Anyway, good chatting with you. 1 Quote Share this post Link to post Share on other sites
turbguy + 1,524 February 24, 2021 (edited) 5 minutes ago, Dan Warnick said: Oh yes, aviation will fill an airman with good memories (amidst the inevitable downturns) for good storytelling later. My first boss out of school was a private owner of a small FBO in Decatur IL. We went on a test flight one day in a customer's King Air and ended up at a Stearman fly in. Fantastic airplanes! Much bigger than I had imagined until then, too. Anyway, good chatting with you. We should have an aviation thread, just to share the close calls! Edited February 24, 2021 by turbguy Quote Share this post Link to post Share on other sites
Ward Smith + 6,615 February 24, 2021 Pilot perspective https://youtu.be/q5Wler87pwY Quote Share this post Link to post Share on other sites
Dan Warnick + 6,100 February 27, 2021 (edited) In-flight repairs! "Hand me that 3/4 inch, Jim. Hurry up, dangit!" Edited February 27, 2021 by Dan Warnick 4 Quote Share this post Link to post Share on other sites
Dan Warnick + 6,100 March 6, 2021 (edited) The latest update on the incident: Incident: United B772 at Denver on Feb 20th 2021, engine inlet separates from engine, engine fire The engine is incredibly good shape, considering..... Edited March 6, 2021 by Dan Warnick 1 Quote Share this post Link to post Share on other sites
turbguy + 1,524 March 7, 2021 23 hours ago, Dan Warnick said: The latest update on the incident: Incident: United B772 at Denver on Feb 20th 2021, engine inlet separates from engine, engine fire The engine is incredibly good shape, considering..... Big pieces don't get through the strainers (IGV's). 1 Quote Share this post Link to post Share on other sites
turbguy + 1,524 May 13, 2021 Nothing like focusing on something other than the root cause (no pun intended). https://www.reuters.com/business/aerospace-defense/us-faa-require-strengthening-key-part-boeing-777-engine-2021-05-12/ 1 Quote Share this post Link to post Share on other sites
Dan Warnick + 6,100 May 20, 2021 On 5/13/2021 at 11:37 AM, turbguy said: Nothing like focusing on something other than the root cause (no pun intended). https://www.reuters.com/business/aerospace-defense/us-faa-require-strengthening-key-part-boeing-777-engine-2021-05-12/ Reminds me of the battery problems on the Dreamliner: Make a stronger box and, SHAZAM(!), no more battery problem! Quote Share this post Link to post Share on other sites
RichieRich216 + 454 RK May 20, 2021 The engine has outside blade protection from blades fracturing and exiting through engine housing, The majority of these issues are a result of bad maintenance or lack there of! Quote Share this post Link to post Share on other sites
-trance + 114 GM May 21, 2021 One look and I thought probably Boeing.... would leader in plane failures (lately). Made in the USA! Quote Share this post Link to post Share on other sites
turbguy + 1,524 May 21, 2021 1 hour ago, -trance said: One look and I thought probably Boeing.... would leader in plane failures (lately). Made in the USA! Actually Pratt & Whitney, with hollow, difficult to "in-service inspect" fan blades. Engine structures and enclosers are designed for some types of failures. Until those structures fail themselves. Quote Share this post Link to post Share on other sites
Dan Warnick + 6,100 May 24, 2021 On 5/21/2021 at 8:19 AM, -trance said: One look and I thought probably Boeing.... would leader in plane failures (lately). Made in the USA! You are aware that we're talking about an engine here, right? And that Boeing doesn't make the engines? Many engines are used on both Boeing and Airbus airframes. Has nothing to do with the aircraft. The only reason the airframers are mentioned is because, as @turbguypointed out, the FAA is said to be focussing on reinforcing the engine cases a higher degree to contain engine blade failures. This is also not a new thing, engine fan casings have had "bulletproof" assemblies added to them for a long, long time already. Quote Share this post Link to post Share on other sites