Sign in to follow this  
Followers 0

Visualizing North Dakota Oil & Gas Production (Through November 2021)

Recommended Posts

This article contains still images from the interactive dashboards available in the original blog post. To follow the instructions in this article, please use the interactive dashboards. Furthermore, they allow you to uncover other insights as well.


Visit ShaleProfile blog to explore the full interactive dashboard

These interactive presentations contain the latest oil & gas production data from all 16,944 horizontal wells in North Dakota that started production from 2001 onward, through November.

Total production

Oil production in North Dakota from horizontal wells rose by 2% m-o-m, to 1.09 million b/d in November. Natural gas output increased as well and came in at 3.0 Bcf/d.

Supply projection

Although drilling activity has picked up in recent months, with 26 rigs drilling horizontal wells as of last week (according to Baker Hughes), from only 8 in September 2020, this level can only sustain about 1 million b/d assuming no changes in productivity (from our Supply Projection dashboard😞


Horizontal rig count and tight oil outlook in North Dakota, based on the current rig count and well/rig productivity.

The top chart displays the horizontal rig count over time, while the bottom chart plots the total oil production from existing and future horizontal wells.

Well productivity

After several years of significant productivity increases, well results have barely changed in the 4 core counties in North Dakota since 2017. This is especially visible after normalizing for lateral length (as these have slightly increased)


Well productivity (cum. oil vs time, per 1,000′ of lateral length) in the 4 core Bakken counties. Horizontal wells completed since 2011 only.

Recent wells are on track to recover 25 thousand barrels of oil per 1,000 ft during the first 2 years on production, just 2% higher compared with the wells that came online in 2018.

Top operators

The final tab shows the production history and location of the top 12 operators in North Dakota. Continental Resources had with 169 thousand b/d of operated production a great November month, fueled by the excellent performance of the 19 wells it brought online in October.

EOG is no longer in this list, as it dropped to the 14th place with an output of only 22 thousand b/d (down from 96 thousand b/d in September 2014). The performance of its wells in Mountrail County (good for 2/3rd of its production) has rapidly deteriorated, probably due to too tight spacing:



Well performance (rate vs. cum) and gas/oil ratio for EOG in Mountrail. Horizontal wells with a production start between 2007 & 2018.

Note in the bottom chart that the GOR has risen steeply for most vintages and that there is a corresponding decline in production rates (top chart). Where the 2007, 2008 and 2013 vintages before were on track to recover more than 600 thousand barrels per well (x-axis), that now has become unlikely.


Early next week we will have a new post on the Permian, for which we already have November production data for most wells.


For these presentations, I used data gathered from the following sources:

  • DMR of North Dakota. These presentations only show the production from horizontal wells; a small amount (about 40 kbo/d) is produced from conventional vertical wells.

Visit our blog to read the full post and use the interactive dashboards to gain more insight:

Follow us on Social Media:

Twitter: @ShaleProfile

LinkedIn: ShaleProfile

Facebook: ShaleProfile

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

You are posting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  
Followers 0